Construction:
|
Moulded from recycled Styrene Butadiene Rubber products
Cannot shrink, buckle, warp or crack
Can be cut with table or band saw
|
| Dimensions: |
Dog-bone configuration
200mm long x 160mm wide and 113mm centers.
Two thickness' offered; 43mm and 25mm |
Weight:
|
1.05 kgs each for 43mm
0.53 kgs each for 25mm
Coverage: 36.8 blocks per m2
|
| Standard Colors: |
Black, Green or Terracotta.
Custom colours available, but dependent on quantity
|
Density Nominal:
|
900+kgs/m3
|
Recommended Adhesives:
|
Flexitec 4020 or Flexitec 6088 two-part epoxy.
|
| Hardness: |
Durometer Standard 80 |
| Thermal Resistance: |
R = 2.32 (ASTM C518-76) |
Cigarette Burn Resistance:
|
Slight Colour Change evident after extinguishments.
|
| Thermal Conductivity: |
K = 0.75 (ASTM D257) |
Thermal Stability:
|
-400°C to +900°C |
| Freeze/Thaw: |
No change (-40°C, 40 cycles) |
Accelerated Weathering:
|
No change (2,500 hours) |
Electrical Conductivity:
|
1.1 x 10.4 (Siemens/meter) |
Tensile Strength:
|
1,200 psi minimum (ASTM D412) |
Compression Strength:
|
6,000 psi minimum |
Compression Endurance:
|
10,000 cycles with 5 ton load No deterioration |
Abrasion Resistance:
|
0.6812 g loss (2,000 cycles Taber Abrader 1 kg) |
Coefficient of Friction:
|
0.64 dry, 0.79 wet (ASTM D1894) |
Flash Point:
|
Between 6500C and 8000C |
Skid Resistance:
|
Skid Test ‘Stanley’ - 75 |
Chemical Resistance:
|
Fuel A: No deterioration
Oil 3: No deterioration
Lubricating oil: No deterioration
Cutting Oil: No deterioration
Dilute Hydrochloric Acid: No deterioration
Sulphuric Acid 25%: No
deterioration
Nitric Acid 5%: No deterioration
Acetic Acid 20%: No deterioration
Salt Water: No deterioration
Chlorinated Water: No deterioration
Water – Distilled: No deterioration
Liquid Detergents: No deterioration
Citric Acid: No deterioration
Coffee: No deterioration
Tea: No deterioration
Urea 6.6%: No deterioration
Cola Based Soft Drink: No deterioration
Lime: No deterioration
|
UVR Reflectance:
|
4.0-4.7% SEEPA 9800065 |
